Almost all modern firefighting systems are currently equipped with a data center fire suppression system. It’s even like an obligation, allowing the system to work without human intervention, but safety precautions against fire hazards are always detected accurately. The application of this kind of system is surely not uniform in each firefighting service provider company. But you have to understand how it works to be selective in choosing a company worth working with.
Contents
How Does This System Work (In General)?
When a fire hazard is detected that has the potential to start a fire, the data center fire suppression system will immediately respond and emit media to extinguish it. The application of this system must meet security standards from the planning, installation, and maintenance aspects. Do not let efforts to extinguish the fire make your strategic device damaged or disrupted.
The selection of the right firefighting company is very important so that you can ensure that the team from the company can implement a standard firefighting system and consider your safety and interests. Before cooperating, you can consult first to get recommendations on the most appropriate firefighting method.
Data Center Fire Suppression System with Oxygen Reduction Method
This method relies on Argon or nitrogen mixed with the element CO2 at a certain dose. When a fire hazard is indicated, the system will immediately replace the oxygen in the server room until the dominance is below 15 percent.
The goal is that the fire does not continue to burn because it is prevented by changing chemical reactions. This kind of method must pay attention to the safety of workers to still get oxygen even though the oxygen reduction system is being activated.
Data Center Fire Suppression System with Cooling Method
This system uses certain chemicals to cool the room so that the fire can be inhibited. However, this method must be accompanied by proper planning, installation, and calculations. Because the cooling medium emitted, too much may be toxic and bring other dangers. This method can be a choice, adjusting to the needs and conditions.
Data Center Fire Suppression System Accessories
To work optimally, this system is supported by several materials so that the way it works can be completely automated. These accessories include:
- Control Panel
It becomes the control center which is spread over several areas. This one accessory must continue to burn. Therefore it is usually equipped with a backup battery so that it can be connected to the system for 24 hours non-stop.
- Fire Detector
This attribute can be a smoke detector, heat, or sparks. Detectors are usually placed in certain areas, such as ceilings or other areas, so that they can quickly provide information when there is an indication of a fire hazard.
- Audible Alarms and Danger Alerts
When the fire detector catches a fire signal, the system will respond by ringing a bell or other loud-sounding device. The range of the alarm sound must also be very loud up to a distance of more than three meters. That way, everyone will immediately be aware of the danger signs; they can save themselves without panicking. You should also not ignore any warning signs that should be readily available so that they can be used quickly and manually.
If you want to get the ideal data center fire suppression system service, go for it. Accurate and effective firefighting system, please cooperate with Totalfire. Our company is experienced in the agenda of fire protection in various conditions and situations. Please access www.totalfire.co.id to see more about our services, as well as the company’s credibility and consistent quality assurance efforts.